Approved NSW Non-Urban Water Metering Local Intelligence Device

Halytech meterwatch is a premium data logger and telemetry device offering the longest battery life in its class. This economical self-contained Local Intelligence Device (LID) is designed specifically for the NSW Non-Urban Water Metering Framework.

meterwatch comes fully configured and site ready. A unique, easy to use web interface lets installers connect to meterwatch to set up and verify meter calibration, mobile signal strength and internet connectivity. Any computer with a browser can be used and no special software is required.

The compact waterproof (IP-68) enclosure makes it suitable for installation in the toughest environments.

Extremely low power operation and field life in excess of 10 years is achieved by utilising the latest LTE Cat M1 communication technologies.

The combination of LTE Cat M1 and flexible external antenna configuration ensures you get the best communications performance poor mobile reception areas.

meterwatch is backed by a 7-year product and battery warranty*.

meterwatch:

• Is fully approved LID for the NSW DAS Non-urban water metering framework
• Is economical to buy, install and operate
• Monitors a single pulse meter with cable and enclosure tamper detection
• Automatically sends data and alarms to the cloud-based NSW Data Acquisition Service (DAS)
• Records usage and alarm data for long term local retrieval
• Uses an LTE Cat M1 modem for optimal signal and battery performance
• Is designed for installation in harsh environments
• Can operate for more than 7 years on its replaceable internal battery

A LANlink Cable (sold-separately) is required to connect meterwatch to a computer.

Halytech can recommend or supply a range of external antennas to suit your applications

The microSpider lite is an economical self-contained data logging and telemetry system. It includes all software, hardware, batteries and a built-in mobile phone module. The compact waterproof (IP-68) enclosure makes it suitable for installations in the toughest environments.

microSpider lite is ideal for simple applications such as metering, tank monitoring and level monitoring.

No software is required on your computer to set up or interrogate a microSpider lite.

The microSpider lite can:

• monitor inputs (analogue, digital, counters, frequency, quadrature/shaft encoder)
• generate SMS, email and twitter alarms
• record data
• send reports via e-mail, FTP or HTTP
• communicate via internal 3G/4G or LTE Cat M1 modem
• be used in wet environments
• operate for more than 5 years on its replaceable internal battery
• update software automatically in-field from remote servers, or update from connected PC.

The microSpider lite is ideal for short and long-term monitoring. It can interface with a wide range of sensors and meters. The browser interface makes it easy to set up and test, and there is no need for external power, batteries or solar panels.

The "M" variant features even lower power consumption by utilising the latest LTE Cat M1 communication technology.
microSpider lite can communicate over private networks as used by large government and commercial entities.

Once installed the microSpider lite will log data and automatically send reports directly to the end user via e-mail, FTP or HTTP.
No specialised web portals or software subscriptions are required.

User configurable alarms can send SMS, e-mail and twitter alarm messages and automatically initiate sending of data reports.

Note: A LANlink Cable (sold-separately) is required to connect the microSpider lite to a computer for configuration via the built-in web server.

Economical – low upfront, installation and operational costs

Easy to use – simple familiar web browser interface

Easy to install

Internal batteries - no external batteries, power supplies or solar panels

Integrated mounting – bolt straight to wall

Waterproof enclosure – no need for extra enclosures

Can be managed remotely using SMS commands or FTP server

No special software required

setup and download using browser

reports sent straight to your PC or server

text/csv reports open in Excel

receive reports via email, FTP or HTTP

No licenses, royalties or service agreements

Large internal memory – full local backup of data

Physical

Dimensions: (approx) 165(W) x 80(H) x 85 (D) mm

Weight: (approx) 800 g

Enclosure: ABS rated IP - 68 with integrated mounting

Operating temperature: -5 to +50 degrees Celsius

Data Recorder

Capacity: approximately 400,000 records

Storage memory: Non-volatile FLASH

Time resolution: 1 second

Download format: CSV file

Battery

Integrated long life lithium batteries (up to 10 years battery life depending on application)

Warranty

Factory backup 12 months parts and labour guarantee

Inputs

Number of inputs:

• 2 digital
• 2 analog
• 4 system inputs
• Up to 8 Modbus (with factory RS-485 interface option)

Digital Inputs:

• 0 - 12V DC Voltage or voltage-free switch contact
• Can be used as switch, event (rainfall), counter or utility meter inputs (user selectable)

Analogue Inputs: Resolution 12 bits

• 4 - 20 mA, common ground
• 0 - 2.4V, common ground
• 0 - 5V, common ground
• 0 - 10V, common ground

Counter / Event Inputs

• Minimum pulse width: 5 ms
• Maximum frequency: 100 Hz
• Range: 0 - 999,999

System Inputs:

• System temperature
• Battery voltage
• LAN power voltage
• Internal moisture sensor

Outputs

Number of outputs 2

• 1 x Open collector for accessory control
• 1 x Low power sensor supply (3.3V or 5V)

Alarms

Number of alarms: 16

Type: SMS, twitter and/or e-mail transmission

Trigger: User definable input and trigger point

SMS / e-mail / twitter text: 1 per alarm, user definable

Number of phone numbers: 3 per alarm, user definable

Number of e-mail addresses 3 per alarm, user definable

Communication Interfaces

Ethernet 10 base-T, RJ-45 connector on comms cable

Cellular phone module: Built-in 4G/3G or LTE Cat M1

Antenna: internal antenna - standard, external antenna - option

Internet connectivity: 4G, 3G, LAN (with LANlink cable)

Product is available in a variety of configurations to suit your needs, you may specify any of the following:

• Internal Modbus RS-485 interface
• Internal or external antenna
• 3G/4G or LTE Cat M1
• Connector or Flying Lead for input
• DNP3
  Compliant with Level 2 of the DNP3 standard, supporting all of the microSpider2's inputs and controls, the DNP3 option allows the microSpider2 to communicate with a SCADA system via 3G/4G modem or local area network.

microSpider Battery

LANlink Cable (required to connect microSpider2 Environmental to a computer)

SDI-12/Modbus Interface

Software

microSpider Lite Software v1.92 (Zip)

microSpider Lite Modbus RS-485 Software v1.92 (Zip)

microSpider Lite Digital Software v1.92 (Zip)

Manuals / Brochures

microSpider Lite Brochure

microSpider Lite Quick Start Guide

microSpider2 Manual V1.26

Instructional Videos

Installing the O-ring

DNP3

microSpider2 Device Profile

microSpider2 XML Device Profile (Zip file)

The microSpider2 Environmental is a completely self-contained data logging and telemetry system. It includes all software, hardware, batteries and a built-in mobile phone module. The compact IP-68 enclosure makes it suitable for installations in the toughest environments.

No software is required on your computer to set up or interrogate a microSpider.

The microSpider2 Environmental can:

• monitor inputs (analogue, digital, counters, frequency, quadrature/shaft encoder)
• control outputs
• generate SMS, email and twitter alarms
• record data
• send data via e-mail, FTP or HTTP
• communicate via internal 3G/4G modem
• be used in wet environments
• operate for more than 5 years on its replaceable internal battery
• update software automatically in-field from remote servers, or update from connected PC.

The microSpider2 Environmental is ideal for short and long term monitoring. It can interface with a wide range of sensors and meters. The browser interface makes it easy to set up and test, and there is no need for external power, batteries or solar panels.

Once installed the microSpider2 Environmental will log data and automatically send reports via e-mail and/or FTP.  User configurable alarms can activate outputs, send SMS, e-mail and twitter alarm messages and automatically send data reports.

Note: A LANlink Cable (sold-separately) is required to connect the microSpider2 Environmental to a computer for configuration via the built-in web server.

Economical – low upfront, installation and operational costs

Easy to use – simple familiar web browser interface

Easy to install

Internal batteries - no external batteries, power supplies or solar panels

Integrated mounting – bolt straight to wall

Waterproof enclosure – no need for extra enclosures

Can be managed remotely (requires LiveSMS option)

No special software required

setup and download using browser

reports sent straight to your PC or server

text/csv reports open in Excel

receive reports via email, FTP or HTTP

No licenses, royalties or service agreements

Large internal memory – full local backup of data

Physical

Dimensions: (approx) 165(W) x 145(H) x 85 (D) mm

Weight: (approx) 800 g

Enclosure: ABS rated IP - 68 with integrated mounting

Operating temperature: -5 to +50 degrees Celsius

Data Recorder

Capacity: approximately 400,000 records

Storage memory: Non-volatile FLASH

Time resolution: 1 second

Download format: CSV file

Battery

Integrated long life lithium batteries (up to 10 years battery life depending on application)

Optional second battery pack

Can be supplemented by external power 

Warranty

Factory backup 12 months parts and labour guarantee

Inputs

Number of inputs:

• Up to 4 digital
• Up to 4 analog
• 6 system inputs
• Up to 20 SDI-12 / Modbus (with optional Intelligent Interface cable)

Digital Inputs:

• 0 - 12V DC Voltage or voltage-free switch contact
• Can be used as switch, event (rainfall), counter or utility meter inputs (user selectable)

Analogue Inputs: Resolution 12 bits

• 4 - 20 mA, common ground
• 0 - 2.4V, common ground
• 0 - 5V, common ground
• 0 - 10V, common ground

Counter / Event Inputs

• Minimum pulse width: 5 ms
• Maximum frequency: 100 Hz
• Range: 0 - 999,999

System Inputs:

• System temperature
• 2 x battery voltage
• External power voltage
• LAN power voltage
• Internal moisture sensor

Outputs

Number of outputs 3 

• 1 x Switched power for sensor power / control
• 1 x Open collector for accessory control
• 1 x Low power sensor supply (3.3V or 5V)

Alarms

Number of alarms: 16

Type: SMS, twitter and/or e-mail transmission

Trigger: User definable input and trigger point

SMS / e-mail / twitter text: 1 per alarm, user definable

Number of phone numbers: 3 per alarm, user definable

Number of e-mail addresses 3 per alarm, user definable

Communication Interfaces

Ethernet 10 base-T, RJ-45 connector on comms cable

Cellular phone module: Built-in 4G, 3G or Iridium satellite

Antenna: internal antenna - standard, external antenna - option

Internet connectivity: 4G, 3G, LAN (with LANlink cable)

Product is available in a variety of configurations to suit your needs, you may specify any of the following:

• One or two internal lithium battery packs
• Internal or external antenna
  
• 3G/4G or Iridium satellite communications 
• Live SMS
  Provides remote access from a web browser or mobile phone and extends the SMS capabilities of the microSpider2. Features include alarm acknowlegement, control activation and the ability to schedule modem power ups to create communication windows.
• DNP3
  Compliant with Level 2 of the DNP3 standard, supporting all of the microSpider2's inputs and controls, the DNP3 option allows the microSpider2 to communicate with a SCADA system via 3G/4G modem or local area network.

microSpider Battery

LANlink Cable (required to connect microSpider2 Environmental to a computer)

SDI-12/Modbus Interface

Software

microSpider2 Environmental Software v1.92 (Zip File)

Manuals / Brochures

microSpider2 Environmental Brochure

microSpider2 Environmental Quick Start Guide

microSpider2 Manual V1.26

Instructional Videos

Installing the O-ring

DNP3

microSpider2 Device Profile

microSpider2 XML Device Profile (Zip file)

The microSpider2 Satellite is a complete data logging and telemetry system. It includes all software, hardware and a built-in satellite modem.

The enclosure fits standard DIN rail brackets. Alternatively, the satellite modem can be supplied as a factory option for the microSpider2 Environmental which has an IP68 enclosure.

The microSpider2 Satellite can

• monitor inputs (analogue, digital, counters, frequency, quadrature/shaft encoder)
• control outputs when alarms are activated
• generate periodic reports
• record data
• send data via Iridium Short Burst Data

The microSpider2 Satellite is ideal for long term monitoring and can interface with a wide range of sensors and meters. The browser interface makes it easy to set up and test. It can be powered from 12V DC.

The microSpider2 Satellite logs data and automatically sends reports via Iridium SBD satellite.

Physical

Dimensions: (approx) 156(L) x 60(H) x 87 (W) mm

Weight: (approx) 500 g

Operating temperature: -5 to +50 degrees Celsius

Data Recorder

Capacity: approximately 400,000 records

Storage memory: Non-volatile FLASH

Time resolution: 1 second

Download format: CSV file

Power Supply

Operating voltage: Nominal 12V DC

Integrated battery charger regulator: Charges an external 12V SLA battery from an external 12V solar panel or a 16 - 30V DC 2A
power source

Backup battery: Internal, user replaceable 9V battery (optional)

Warranty

Factory backup 12 months parts and labour guarantee

Inputs

Number of inputs:

• Up to 4 digital
• Up to 4 analog
• 4 system inputs
• Up to 20 SDI-12 / Modbus (with optional SDI-12/Modbus Interface)

Digital Inputs:

• 0 - 12V DC Voltage or voltage-free switch contact
• Can be used as switch, event (rainfall) or counter inputs (user selectable)

Analogue Inputs: Resolution 12 bits

• 4 - 20 mA, common ground
• 0 - 2.4V, common ground
• 0 - 5V, common ground
• 0 - 10V, common ground

Counter / Event Inputs

• Minimum pulse width: 5 ms
• Maximum frequency: 100 Hz
• Range: 0 - 999,999

System Inputs:

• System temperature
• External battery voltage
• Charger voltage
• LAN power voltage

Outputs

Number of outputs 3

• 1 x Switched power for sensor power / control
• 1 x Open collector for accessory control
• 1 x Low power sensor supply (3.3V or 5V)

Alarms

Number of alarms: 16

Trigger: User definable input and trigger point

Actions: Control of up to three outputs, based on input levels and/or date/time

Communication Interfaces

Ethernet 10/100 base-T, RJ-45 connector

Communications module: Iridium satellite

Internet connectivity: LAN

Software

microSpider2 Environmental Satellite Software v1.92 (Zip File)

microSpider2 Industrial Satellite Software v1.92 (Zip File)

Manuals / Brochures

microSpider2 Satellite Brochure

microSpider2 Satellite User Guide v1.01

Halytech Spider SMS is a compact low power data logger with telemetry. It is the complete remote monitoring, control and alarm system. It can communicate by SMS, e-mail, voice. internet and more...

The Spider:

• requires no system integration or custom software
• monitors 100's of inputs (analog, digital, counters, frequency, SDI-12, Modbus, RF and more ...)
• controls outputs
• generates SMS, e-mail and voice alarms
• respond to SMS commands
• logs (records) data
• sends data reports via e-mail or FTP
• communicates via integrated GSM/NextG/Satellite modem
• displays system/channel information on LCD
• is set up through user friendly "Internet surfing" approach

Read more ...

The hydrospider2 is an ultra low power economical solution for data logging, automatic reporting and alarm dialing. It communicates via SMS, email, FTP, Twitter and more.

The hydrospider2 is housed in a compact IP60 enclosure. Its small size makes it ideal for a variety of environmental and industrial monitoring applications.
The whole system including an external battery is designed to fit inside a Tipping Bucket Rain Gauge (TBRG), dramatically reducing installation costs of rainfall monitoring stations.

The hydrospider2 has an easy to use web interface with built in help. It can be used with any computer or operating system without the need to install any
software.

The hydrospider2 can:

• monitor inputs (analogue, digital, counters, frequency, quadrature/shaft encoder)
• control outputs
• generate SMS, email and twitter alarms
• record data
• send data via e-mail, FTP and/or HTTP
• communicate via internal 4G/3G module
• be used in dusty environments
• charge an external SLA battery via a built-in solar panel / mains charger
• update software automatically in-field from remote servers, or update from connected PC.

The hydrospider2 is ideal for short and long term monitoring. It can interface with a wide range of sensors and meters and the browser interface makes it easy to set up and test.

Once installed the hydrospider2 will log data and automatically send reports via e-mail, FTP and/or HTTP. User configurable alarms can activate outputs, send SMS, e-mail and twitter alarm messages and automatically send data reports.

Note: A LANlink Cable (sold-separately) is required to connect the hydrospider2 to a computer for configuration via the built-in web server.

Economical – low upfront, installation and operational costs

Easy to use – simple familiar web browser interface

Easy to install

Small size –  designed to fit inside a Tipping Bucket Rain Gauge (TBRG)

No special software required

setup and download using browser

can be managed remotely (requires LiveSMS option)

reports sent straight to your PC or server

text/csv reports open in Excel

receive reports via email, FTP and/or HTTP

No licenses, royalties or service agreements

Large internal memory – full local backup of data

Physical

Dimensions: 158(W) x 90(H) x 46(D) mm

Weight: 360 g

Enclosure: ABS rated IP60

Operating temperature:

-5 to +60 degrees Celsius (standard)
-20 to +60 degrees Celsius (with "X" option)

Data Recorder

Capacity: approximately 400,000 records

Storage memory: Non-volatile FLASH

Time resolution: 1 second

Time synchronisation: Automatic by NTP

Download format: CSV file

Power Supply

Operating voltage: Nominal 12V DC

Charger type: Built-in battery management system supporting an external SLA battery and external 12V solar panel and/or 16 - 24V DC mains charger

Backup battery: Internal, user replaceable 9V battery

Warranty

Factory backup 12 months parts and labour guarantee

Inputs

Number of inputs:

• Up to 2 digital
• Up to 2 analog
• 4 system inputs
• Up to 16 SDI-12 / Modbus or RS-232 (with factory option)

Digital Inputs:

• 0 - 12V DC Voltage or voltage-free switch contact
• Can be used as switch, event (rainfall), counter or utility meter inputs (user selectable)

Analogue Inputs: Resolution 12 bits

• 4 - 20 mA, common ground
• 0 - 2.4V, common ground
• 0 - 5V, common ground
• 0 - 10V, common ground

Counter / Event Inputs

• Minimum pulse width: 5 ms
• Maximum frequency: 100 Hz
• Range: 0 - 999,999

System Inputs:

• System temperature
• External battery voltage
• Charger voltage
• Internal moisture sensor

Outputs

Number of outputs 2 

• 1 x open collector for accessory control
• 1 x switched power for sensor control

Alarms

Number of alarms: 16

Type: SMS, Twitter and/or e-mail transmission

Trigger: User definable input and trigger point

SMS / e-mail / twitter text: 1 per alarm, user definable

Number of phone numbers: 3 per alarm, user definable

Number of e-mail addresses 3 per alarm, user definable

Communication Interfaces

Ethernet: 10/100 base-T with LANlink Cable

Cellular phone module: Built-in 4G with 3G fallback

Antenna: internal antenna - external antenna with SMA connector

Internet connectivity: 4G, 3G, LAN (with LANlink cable)

Optional Display / Keypad: Backlit 2 line x 16 char LCD, 3 key keypad

Product is available in a variety of configurations to suit your needs, you may specify any of the following:

• SDI-12 / Modbus or RS-232 Intelligent Interface option
• Auxilliary SDI-12 Interface option
• Display / Keypad: Backlit 2 line x 16 char LCD, 3 key keypad
• LiveSMS
  Provides remote access from a web browser or mobile phone and extends the SMS capabilities of the microSpider2. Features include alarm acknowlegement, control activation and the ability to schedule modem power ups to create communication windows.
• DNP3
  Compliant with Level 2 of the DNP3 standard, supporting all of the microSpider2's inputs and controls, the DNP3 option allows the microSpider2 to communicate with a SCADA system via 4G/3G modem or local area network.

LANlink Cable (required to connect hydrospider2 to a computer)

Mains Power Supply

12V Solar Panel

12V 7.2Ah Sealed Lead-Acid Battery

Tipping Bucket Rain Gauge (TBRG)

Mounting Bracket for TBRG

12V 2.3Ah Sealed Lead-Acid Battery (fits inside TBRG)

Software

hydrospider2 Software v1.92 (Zip File)

hydrospider2 SDI-12 / RS-485 Software v1.92 (Zip file)

hydrospider2 RS232 v1.92 (Zip file)

Manuals / Brochures

hydrospider2 Brochure

hydrospider2 Quick Start Guide

hydrospider2 Manual V1.25

DNP3

hydrospider2 Device Profile

hydrospider2 XML Device Profile (Zip file)

The microSpider2 Industrial is a complete data logging and telemetry system. It includes all software, hardware, backup battery and a built-in mobile phone module. The enclosure fits standard DIN rail brackets.

The microSpider2 Industrial can

• monitor inputs (analogue, digital, counters, frequency, quadrature/shaft encoder)
• control outputs
• generate SMS, email and twitter alarms
• record data
• send data via e-mail, FTP and HTTP
• communicate via internal 3G/4G modem
• charge an external SLA battery via a built-in solar panel / mains charger
• update software automatically in-field from remote servers, or update from connected pc.

The microSpider2 Industrial is ideal for long term monitoring and can interface with a wide range of sensors and meters. the browser interface makes it easy to set up and test. It can be powered from 12v dc.

The microSpider2 Industrial logs data and automatically sends reports via email or ftp. Any alarms can activate outputs, send SMS and email alarm messages as well as historical reports

Economical – low upfront, installation and operational costs

Easy to use – simple familiar web browser interface

Easy to install

Integrated mounting – DIN rail compatible.

Simply connect antenna, battery / supply and inputs.

No special software required

setup and download using browser

can be managed remotely (requires LiveSMS option)

reports sent straight to your PC or server

text/csv reports open in Excel

receive reports via email, FTP and HTTP

No licenses, royalties or service agreements

Large internal memory – full local backup of data

Physical

Dimensions: (approx) 156(L) x 60(H) x 87 (W) mm

Weight: (approx) 500 g

Operating temperature: -5 to +50 degrees Celsius

Data Recorder

Capacity: approximately 400,000 records

Storage memory: Non-volatile FLASH

Time resolution: 1 second

Download format: CSV file

Power Supply

Operating voltage:

Nominal 12V DC, min 1A

Power consumption:

Standby 65 uA
Active <3mA (modem off, LAN powered externally)
Active 100mA (modem on, LAN powered internally)
Active 250mA (modem on, communicating)

Integrated battery charger regulator:

Charges an external 12V SLA battery from an external 12V solar panel or a 16 - 30V DC 2A
power source

Backup battery:

Internal, user replaceable 9V battery (optional)

Warranty

Factory backup 12 months parts and labour guarantee

Inputs

Number of inputs:

• Up to 4 digital
• Up to 4 analog
• 4 system inputs
• Up to 20 SDI-12 / Modbus (with optional SDI-12/Modbus Interface)

Digital Inputs:

• 0 - 12V DC Voltage or voltage-free switch contact
• Can be used as switch, event (rainfall), counter or utility meter inputs (user selectable)

Analogue Inputs: Resolution 12 bits

• 4 - 20 mA, common ground
• 0 - 2.4V, common ground
• 0 - 5V, common ground
• 0 - 10V, common ground

Counter / Event Inputs

• Minimum pulse width: 5 ms
• Maximum frequency: 100 Hz
• Range: 0 - 999,999

System Inputs:

• System temperature
• External battery voltage
• Charger voltage
• LAN power voltage

Outputs

Number of outputs 3 

• 1 x Switched power for sensor power / control
• 1 x Open collector for accessory control
• 1 x Low power sensor supply (3.3V or 5V)

Alarms

Number of alarms: 16

Type: SMS, twitter and/or e-mail transmission

Trigger: User definable input and trigger point

SMS / e-mail / twitter text: 1 per alarm, user definable

Number of phone numbers: 3 per alarm, user definable

Number of e-mail addresses 2 per alarm, user definable

Communication Interfaces

Ethernet 10/100 base-T, RJ-45 connector

Cellular phone module: Built-in 4G, 3G or Iridium satellite

Antenna: internal antenna - External antenna, SMA connector

Internet connectivity: 4G, 3G, LAN

Product is available in a variety of configurations to suit your needs, you may specify any of the following:

• 4G/3G or Iridium satellite communications
• Live SMS
  Provides remote access from a web browser or mobile phone and extends the SMS capabilities of the microSpider2. Features include alarm acknowlegement, control activation and the ability to schedule modem power ups to create communication windows.
• DNP3
  Compliant with Level 2 of the DNP3 standard, supporting all of the microSpider2's inputs and controls, the DNP3 option allows the microSpider2 to communicate with a SCADA system via 4G/3G modem or local area network.

SDI-12/Modbus Interface

GPS Interface

Mains power supply

Solar panel

Sealed lead acid battery

Range of external 4G/3G Antennae

Software

microSpider2 Industrial Software v1.92 (Zip File)

Manuals / Brochures

microSpider2 Industrial Brochure

microSpider2 Industrial Quick Start Guide

microSpider2 Manual V1.26

DNP3

microSpider2 Device Profile

microSpider2 XML Device Profile (Zip file)