Borewatch
Compact Borehole & Groundwater Monitoring
Borewatch is a low-power data logger for groundwater, boreholes, and environmental applications. Install directly inside a 2-inch pipe for discreet, vandal-resistant operation.
Key Features
Discreet Internal Pipe Mounting
Installs directly inside a 2-inch (50mm) borehole or pipe, no external pole or enclosure needed.
Long-Term Deployment
Up to 5 years of battery life for remote, low-maintenance installations.
Proactive Alerts & Monitoring
Automatic SMS and email alarms for water levels, pH, salinity, or other sensor parameters.
Flexible Data Reporting
Schedule CSV reports and integrate with backend systems via HTTP, FTP, or optional DNP3.
Compact & Durable
49mm stainless steel IP68-rated housing designed for harsh environments
Multi-Sensor Compatibility
Supports SDI-12, Modbus RS-485, analog, and digital sensors.
-
Enclosure: IP68-rated, stainless steel
Size & Weight: 49mm (W) × 410mm (H), 720g
Temperature Range: -20°C to +60°C
Mounting: Direct suspension inside 50mm pipe
Warranty: 12-month manufacturer’s warranty
-
Battery Type: Replaceable 7.2V Li-SOCl₂ (Lithium Thionyl Chloride), 13 Ah
Expected Life: 3–5 years (1-hour logging, daily reports, good signal, self-powered sensor, 1 alarm per month)
External Power Support: 12–22V DC solar input
-
20 configurable channels total — any mix of analogue/digital inputs, system inputs, SDI-12 readings, Modbus readings, and virtual (calculation) channels
Each SDI-12 or Modbus sensor value occupies one channel slot. A single physical sensor returning multiple values uses multiple slots
Sensor Inputs:
Analogue
Digital
SDI-12 bus
Modbus RS-485 bus
System Inputs:
Battery voltage
External power voltage
Internal temperature
Moisture sensor
Input Compatibility:
4–20 mA, 0–2.4V, 0–5V, 0–10V
Switch, counter, event (rainfall), meter
-
Memory Type: Non-volatile flash
Storage Capacity: ~300,000 records
Report Format: CSV
-
Mobile: 4G or LTE Cat-M1 (variant-dependent)
Wired: Ethernet (via LANLink cable)
Wi-Fi: Supported via HLink dongle
Protocols:
– HTTP/HTTPS POST
– FTP
– Email
– DNP3 (optional)Antenna Options:
External SMA
2× for 4G variant
1× for Cat-M1 variant
-
Clock: On-board RTC (Real-Time Clock)
Sync: Automatic NTP synchronisation
-
📎 © 2026 Halytech. Specifications subject to change without notice.
How It Works
-
Insert Borewatch into the borehole and connect sensors.
-
Set up in minutes via Wi-Fi (HLink) or Ethernet (LANlink), no software required
-
Automate data collection, alarms, and reporting over mobile networks.
-
Use CSV reports for environmental tracking and compliance.
Applications
Groundwater Monitoring
Agriculture & Irrigation
Borehole Monitoring
Simplify Your Borehole
No bulky enclosures, poles, or complex installations. Borewatch delivers a discreet, pipe-mounted solution that’s pre‑configured for reliable groundwater and borehole monitoring, so you can deploy, collect data, and focus on decisions, not setup.
