hydroSpider1 smallThe hydrospider2 is an ultra low power economical solution for data logging, automatic reporting and alarm dialing. It communicates via SMS, email, FTP, Twitter and more.

The hydrospider2 is housed in a compact IP60 enclosure. Its small size makes it ideal for a variety of environmental and industrial monitoring applications.
The whole system including an external battery is designed to fit inside a Tipping Bucket Rain Gauge (TBRG), dramatically reducing installation costs of rainfall monitoring stations.

The hydrospider2 has an easy to use web interface with built in help. It can be used with any computer or operating system without the need to install any
software.

The hydrospider2 can:

  • monitor inputs (analogue, digital, counters, frequency, quadrature/shaft encoder)
  • control outputs
  • generate SMS, email and twitter alarms
  • record data
  • send data via e-mail or FTP
  • communicate via internal 3G module
  • be used in dusty environments
  • charge an external SLA battery via a built-in solar panel / mains charger
  • update software automatically in-field from remote servers, or update from connected PC.

The hydrospider2 is ideal for short and long term monitoring. It can interface with a wide range of sensors and meters and the browser interface makes it easy to set up and test.

Once installed the hydrospider2 will log data and automatically send reports via e-mail and/or FTP. User configurable alarms can activate outputs, send SMS, e-mail and twitter alarm messages and automatically send data reports.

Note: A LANlink Cable (sold-separately) is required to connect the hydrospider2 to a computer for configuration via the built-in web server.

Benefits

Economical – low upfront, installation and operational costs

Easy to use – simple familiar web browser interface

Easy to install

Small size –  designed to fit inside a Tipping Bucket Rain Gauge (TBRG)

No special software required

setup and download using browser

can be managed remotely (requires LiveSMS option)

reports sent straight to your PC or server

text/csv reports open in Excel

receive reports via email or FTP

No licenses, royalties or service agreements

Large internal memory – full local backup of data

General

Physical

Dimensions: 158(W) x 90(H) x 46(D) mm

Weight: 360 g

Enclosure: ABS rated IP60

Operating temperature:

-5 to +60 degrees Celsius (standard)
-20 to +60 degrees Celsius (with "X" option)

Data Recorder

Capacity: approximately 400,000 records

Storage memory: Non-volatile FLASH

Time resolution: 1 second

Time synchronisation: Automatic by NTP

Download format: CSV file

Power Supply

Operating voltage: Nominal 12V DC

Charger type: Built-in battery management system supporting an external SLA battery and external 12V solar panel and/or 16 - 24V DC mains charger

Backup battery: Internal, user replaceable 9V battery

Warranty

Factory backup 12 months parts and labour guarantee

Inputs/Outputs

Inputs

Number of inputs:

  • Up to 2 digital
  • Up to 2 analog
  • 4 system inputs
  • Up to 16 SDI-12 / Modbus or RS-232 (with factory option)

Digital Inputs:

  • 0 - 12V DC Voltage or voltage-free switch contact
  • Can be used as switch, event (rainfall), counter or utility meter inputs (user selectable)

Analogue Inputs: Resolution 12 bits

  • 4 - 20 mA, common ground
  • 0 - 2.4V, common ground
  • 0 - 5V, common ground
  • 0 - 10V, common ground

Counter / Event Inputs

  • Minimum pulse width: 5 ms
  • Maximum frequency: 100 Hz
  • Range: 0 - 999,999

System Inputs:

  • System temperature
  • External battery voltage
  • Charger voltage
  • Internal moisture sensor

Outputs

Number of outputs 2 

  • 1 x open collector for accessory control
  • 1 x switched power for sensor control

Alarms/Comms

Alarms

Number of alarms: 8

Type: SMS, Twitter and/or e-mail transmission

Trigger: User definable input and trigger point

SMS / e-mail / twitter text: 1 per alarm, user definable

Number of phone numbers: 3 per alarm, user definable

Number of e-mail addresses 3 per alarm, user definable

Communication Interfaces

Ethernet: 10/100 base-T with LANlink Cable

Cellular phone module: Built-in 3G (GSM backwards compatible)

Antenna: internal antenna - external antenna with SMA connector

Internet connectivity: 3G (GPRS backwards compatible)

Optional Display / Keypad: Backlit 2 line x 16 char LCD, 3 key keypad

Options

Product is available in a variety of configurations to suit your needs, you may specify any of the following:

  • SDI-12 / Modbus or RS-232 Intelligent Interface option
  • Display / Keypad: Backlit 2 line x 16 char LCD, 3 key keypad
  • LiveSMS
    Provides remote access from a web browser or mobile phone and extends the SMS capabilities of the microSpider2. Features include alarm acknowlegement, control activation and the ability to schedule modem power ups to create communication windows.
  • DNP3
    Fully compliant with Level 2 of the DNP3 standard, supporting all of the microSpider2's inputs and controls, the DNP3 option allows the microSpider2 to communicate with a SCADA system via 3G modem or local area network.

Accessories

LANlink Cable (required to connect hydrospider2 to a computer)

Mains Power Supply

12V Solar Panel

12V 7.2Ah Sealed Lead-Acid Battery

Tipping Bucket Rain Gauge (TBRG)

Mounting Bracket for TBRG

12V 2.3Ah Sealed Lead-Acid Battery (fits inside TBRG)

News

DNP3 protocol now available for microSpider2 and hydrospider2 data loggers

Sydney, NSW 13th March 2017

In response to customer requests, Halytech has implemented the Distributed Network Protocol (DNP3) for its microSpider2 and hydrospider2 data loggers, making it easy to fully integrate the loggers into centralised SCADA systems.

Read more ...

Contact Us

Unit 11, 22 Lexington Drive
Norwest Business Park
Bella Vista NSW 2153

9:00 - 5:00 Monday to Friday

phone +61 2 8814 5235

sales@halytech.com.au

support@halytech.com.au